popular searches: Woodworking equipment manufacturersChalet linkWooden house link manufacturer

木屋链接件

news

Product

hot key words

contact us

Tel: 0417-6273385

Fax: 0417-6239168

Website: www.ykxbyjx.com

Website : en.ykxbyjx.com 

Address: Pearl Plaza, Yangtze Road, Yingkou Economic and Technological Development Zone, Liaoning Province


Analysis of Common Woodworking Machinery Faults

Your current location: Home >> News >> Industry news

Analysis of Common Woodworking Machinery Faults

Date of release:2018-07-27 Author: Click:

(1) Alarm malfunction




Over-range alarm indicates that the machine has reached its limit during operation. Please follow the following steps to check:




1. Whether the designed figure size is beyond the processing range.




2. Check whether the connecting line between the machine motor shaft and the screw is loose. If so, tighten the screw.




3. Whether the machine and computer are grounded correctly.




4. Does the current coordinate value exceed the soft limit value range?




(2) Over-distance alarm and removal




All motion axes are automatically set in the point-motion state when the overrun occurs. As long as the manual direction key is kept down, the connecting motion state can be restored at any time when the machine leaves the limit position (i.e. the overrun point switch). When moving the worktable, the direction of movement must be far from the limit position. The soft limit alarm should clear XYZ in the coordinate setting.




(3) Non-alarm failure 1, inadequate repetitive processing accuracy, check according to Item 2 of Article 1.




2. When the computer is running and the machine is not moving, check whether the connection between the computer control card and the electrical box is loose. If so, insert and tighten the fixing screw.




3. The machine can not find the signal when it returns to the mechanical origin. Check according to Article 2. The mechanical origin is close to the failure of the switch.




(4) Output failure 1. If not, please check whether the computer and control box are connected properly.




2. Open the settings of the sculpture manager and delete unused files.




3. Whether the signal wiring is loose or not, check carefully whether the lines are connected.




(5) Engraving failure 1. Whether the screw of each part is loose or not.




2. Check if the path you are dealing with is correct.




3. Whether the file is too large, millions of computer processing errors.




4. Increase or decrease the spindle speed to adapt to different materials (generally 8000-24000)




5. Turn loose the knife chuck, clamp the knife in a different direction, and set the knife straight so as to avoid unclean carving objects.




6. Check whether the cutter is damaged, replace it with a new one and carve it again.


The address of this article:http://en.ykxbyjx.com/news/387.html

Key word:

Recently browse:

contact us

Yingkou Xin Baiyun Machinery Co., Ltd.


Tel: 0417-6273385

Fax: 0417-6239168

Website: www.ykxbyjx.com

Website : en.ykxbyjx.com  

Address: Pearl Plaza, Yangtze Road, Yingkou Economic and Technological Development Zone, Liaoning Province


Follow us
Wooden House Link Parts Manufacturer
Mobile website